Second time around radar return suppression using PRI modulation

A technique for suppressing second-time-around radar returns using pulse-repetition interval (PRI) modulation is presented and analyzed. It is shown that a staggered PRI radar system can offer considerable improvement over a nonstaggered radar system in rejecting second-time-around returns which cause false alarms. This improvement is a function of detector implementation (noncoherent integrator or binary integrator), the number of staggered PRIs, the quiescent false alarm number, the Swerling number of the false return, the transmitted signal power, the second-time-around noise power, and the quiescent noise power of the radar. Small changes in transmitted signal power can be traded off with the quiescent false alarm number to suppress the bogus return significantly. In addition, for a noncoherent integrator, all other parameters being equal, if the second-time-around return is a Swerling case II or IV target, then there is an optimum number of staggered PRIs that can be chosen to minimize the likelihood of its detection. It is also shown that the binary integrator significantly reduces the number of second-time-around return detections when compared with the noncoherent integrator. However, there is an accompanying loss of detection.<
>