Analysis of a dual circularly polarized microstrip antenna fed by crossed slots

A dual circularly polarized, wideband microstrip antenna fed by two perpendicular crossed slots is analyzed in this work. The cross shaped aperture in the ground plane provides coupling between the microstrip patch and a single microstrip line underneath the ground plane, traversing the four arms of the cross in a serial manner, thereby generating four coupling points in phase quadratures for both senses of circular polarization. The analysis of this antenna incorporates two stages: In the first one, the individual load impedances are computed via an integral equation based on reciprocity, assuming no interactions between the ports. The second stage employs a transmission line model where the four coupling points are considered as lumped loads along the feed line. An iterative scheme employs the transmission line model for the determination of the actual impedances of each coupling point, including the mutual interactions with the other coupling points. This procedure provides control over the overall level of radiated energy; hence it can be used in the design procedure of this antenna as a serial or parallel fed array element. The computed results agree very well with measurements. The antenna attains a -3 dB gain bandwidth of 13% to 15%, a 3-dB axial ratio bandwidth of 48%, and -15 dB return loss bandwidth of 60%.<
>