Hybrid analytical modeling method for split power bus in multilayered package

As multiple chips are being integrated into a single package with increased operating frequency, switching noise coupling on power buses has become an important design issue. To reduce the noise coupling, a split power bus structure has been generally used in package substrates having multilayered power and ground planes. Consequently, there is an increasing need for an efficient method to analyze a split power bus in a multilayered package. This paper introduces a hybrid analytical modeling method for characterizing a split power bus in a multilayered package. The proposed method uses a resonant cavity model combined with a segmentation method. Furthermore, a port assignment technique and an associated calculation method for the equivalent circuit model parameter of the split gap are proposed. The proposed port assignment technique and the analytical equation make it possible to analyze a split power bus, especially in a multilayered package. To verify the proposed method, multilayered test packages are fabricated and tested by means of frequency-domain measurements. In addition, an optimal power bus design method was successfully demonstrated for suppressing noise coupling between chips on a single package. Finally, the proposed method and optimal power bus design method was verified using a series of frequency-domain and time-domain measurements.