S-parameter-based IC interconnect transmission line characterization

A methodology for extracting high-frequency IC interconnect transmission parameters directly from S-parameter measurements has been demonstrated using on-chip test structures. The methodology consists of: (1) building on-chip interconnect structures for microwave test, (2) characterizing and subtracting measurement system parasitics, (3) extracting the transmission line impedance and propagation constant (attenuation constant and phase constant) from the calibrated data, and (4) extracting the Telegrapher's Equation transmission parameters (R, L, C, and G). Additional on-chip calibration permits subtraction of pad parasitic effects. This methodology is demonstrated over a 45-MHz to 20-GHz frequency range using an example 1-cm-long, 4- mu m-wide IC interconnect built in an advanced BiCMOS technology. Variations in interconnect impedance and capacitance indicate two signal propagation modes. Significant substrate-based loss is measured at microwave frequencies.<
>