On the performance of high perveance electron guns

A design of high perveance electron gun has recently been proposed by Müller. An experimental investigation has been made of the electron beams produced from: 1) a gun designed directly from Müller's charts, and 2) a gun whose design is a modification of the Müller design to make it more suitable for high-voltage operation. The perveance in each case was about 2 × 10
^-6
. The distribution of the current density and the profile of the beam were examined, either by allowing the beam to fall on a plate coated with carbon, or by measuring the current passing through a pinhole in a screen which could be moved across the beam at a number of axial positions. Electrostatic experiments showed that the beams were initially annular, but further along the axis the current density became highest at the center. This is attributed to crossing trajectories resulting from lens aberrations in an anode aperture whose diameter is comparable with the cathode-anode spacing. With magnetic focusing, the current density distribution across the beam varied periodically along the axis to an extent which depended critically on the magnetic field conditions in the accelerating region of the gun.