A parallel resonant converter with postregulators

A parallel resonant power converter (PRC) with postregulator(s) power synchronized to the primary switching frequency is investigated for discontinuous-conduction mode operation. It is analyzed with a magnetic amplifier, which blocks the rising edge of the secondary voltage, and with a synchronized buck regulator, which blocks part of the trailing edge of the secondary voltage waveform under the steady-state conditions. As a result, it has been shown that magnetic amplifiers are not suitable for resonant mode power converters, since the step change of the load from low to high during the same switching period as the primary makes the operating conditions worse. However, postregulators that block the trailing edge of the secondary voltage waveform do not adversely affect the operating conditions of PRC and work satisfactorily. As an alternative, a PRC with a magnetic postregulator is presented. An offline 150 W 250 kHz PRC is designed with a magnetic postregulator for a personal computer application, and experimental waveforms are included.<
>