Transients on multiconductor transmission lines above dissipative earth-numerical simulation and measurement

A finite-difference time-domain (FDTD) analysis is presented to simulate, up to the high-frequency regime, transients on multiconductor transmission lines above dissipative earth. Excitation is in the high-frequency regime if the pulse has significant spectral content up to /spl omega//spl ap//spl omega//sub c/, with /spl omega//sub c/ the frequency where the conduction and displacement current densities have equal magnitude. Thus, /spl omega//sub c/=/spl sigma//sub g///spl epsi//sub 0//spl epsi//sub rg/ with /spl sigma//sub g/ and /spl epsi//sub rg/ the ground conductance and relative permittivity. The FDTD algorithm extends the formulation of Agrawal et al. (1980), by incorporating the theory of D'Amore and Sarto for the interaction of wide-band transients with the earth. Careful experimental testing of the new algorithm is presented. The measurement configuration consists of two parallel wires; first suspended above an aluminum sheet to test the code in the low-frequency regime; then above a block of absorbing material for experiments in the high-frequency regime. The end of one of the conductors is driven with a 2-ns synthesized impulse by a stepped-frequency, automatic network analyzer. Reflected and cross-talk signals are presented in the time domain. These show good agreement with the numerically predicted common mode, differential mode and mode-converted pulses.