A general three-phase PFC controller for rectifiers with a parallel-connected dual boost topology

A general constant-frequency power-factor-correction (PFC) controller is proposed for three-phase rectifiers with parallel-connected dual-boost topologies. This paper shows that unity power factor and low current distortion in all three phases can be realized by one-cycle control using one integrator with reset along with a few near and logic components. This new extension of one-cycle control provides the core PFC function to the dual-boost topologies. It does not require multipliers, as used in most other control approaches to scale the current reference according to the output power level. In each 60/spl deg/ of AC line cycle, only two switches are switched at high frequency; therefore the switching losses are significantly reduced. All switches are switched at low current, which results in reduced current ratings. This control method is simple and general. It is applicable to three-phase rectifiers that can be decoupled into parallel-connected dual-boost topologies by slight modification of the logic circuit. This control method is verified by experimental results. The proposed controller is suitable to be integrated into a three-phase PFC control chip.