A technique to estimate the relative gains, tuning phases, and RE phase shifts of the elements of a phased-array radar

An in-situ technique to estimate the following parameters of a phased-array antenna is described: 1) the relative array-element excitation voltages, 2) the array-element tuning phases, and 3) the RF phase shifts at the array elements. This technique has several significant features. First, it involves the use of two auxiliary antennas. One is a remote continuous wave (CW) source directed at the phased-array antenna. The other is a passive antenna mounted close to the phased-array antenna. Its output is used to produce a reference phase for phase measurements. Second, it contains a technique to reduce the errors in phase estimates. Third, it takes note that beam steering uses phase sums of the form (
\phi_{k} + \beta_{kl}
), where
\phi_{k}
is the tuning phase for the
k
th array elemenet and
\beta_{kl}
, is an RF phase shift of the array element, and pays special attention to reduce the errors associated with the estimates of these sums. Fourth, it assumes the use of a reasonably stable and strong CW source of commerically available quality. No other assumptions are made. Experimental results obtained with a 295-element
S
-band space-fed phased-array antenna are given.