Energy and Size Reduction of Grid-Interfaced Energy Buffers Through Line Waveform Control

Grid-interface converters with power factor correction (PFC) generally require large energy buffer capacitors to maintain a constant power output. These buffer capacitors can occupy 20-30% of total system volume, and their size is unaffected by typical methods of miniaturizing power converters such as increasing efficiency or changing switching frequency. Here we investigate an approach in which harmonic current is intentionally drawn from the grid (within allowed regulations) to reduce the required energy storage. We show that this method can achieve up to a 62% reduction in energy storage requirements under EN61000-3-2 Class D regulations, with continued benefit available at higher powers under Class A. This benefit can generally be achieved solely through controls without additional hardware and can be applied across PFC converter topologies. A valley-switched boost PFC converter is used to validate that harmonic injection achieves the calculated energy storage reduction with little impact on efficiency. It is also shown that the proposed approach provides the added benefit of compressing the PFC switching frequency range.