Compact reflex triode operation at 10 Hz repetition rate and long pulsewidths

This study focuses on the performance of a bimodal carbon fiber (CF) cathode and a carbon-epoxy multicapillary (CEM) cathode with microwaves at 50kV/m at 2m lasting 100 ns in a compact reflex triode virtual cathode oscillator (vircator). It was previously revealed that the CEM cathode was able to produce uniform emission distribution for a long duration
¹
. To further uncover the location(s) where plasma is forming, an intensified CCD camera is used to image both cathodes with high spatial and temporal resolution. A titanium grade 1 (TiG1) anode that is 70% transparent is used to minimize outgassing in the system resulting in the cathode being the primary outgassing constituent
²
. One data set for each cathode was taken. Each data set contains diode current, voltage, and microwave fields over the course of 10,000 shots. A performance baseline is shown by comparing the evolution of these data over the course of the experiments. An 8 stage, 168 J pulse forming network (PFN) based Marx generator serves to drive both cathodes at 250 kV, 4 kA with ~175 ns pulsewidth, achieving current densities of ~200 A/cm
³
. The operating frequency of interest is set in the range of 1-2 GHz, where the tunability is achieved by varying the size of the anode-cathode (A-K) gap. In all experiments the gap is fired at a 10 Hz pulse repetition rate. The characteristics of one type of cathode over the other, depending on the operating conditions, are discussed in detail.