Experimental optimization of a Reflex Triode Virtual Cathode Oscillator

Experimental findings on a high power Reflex Triode Virtual Cathode Oscillator (Vircator) at Texas Tech University are reported. In order to optimize performance, changes to the AK gap distance were made. The AK gap was varied from 0.5 to 1.5 cm. The type of cathode material employed was velvet. Cathode radius was 2.5 cm. The Reflex Triode Vircator is driven by a 350 kV Marx generator with a 60 ns, 20 ohm pulsed forming line. Typical peak input power is 4 GW. The output microwave power is measured in the far-field with a waveguide to coax adapter. Thus far we have observed microwave peak power output as high as 330 MW corresponding to a peak power efficiency of ~ 11 %. In an effort to provide premodulation to the vircator region, reflecting strips were added in the downstream waveguide. This technique has been employed with success by this group with a coaxial Vircator.