Electro-Explosive Fuse Optimization for Helical Flux Compression Generator using a Non-Explosive Test Bed

Helical Flux Compression Generators (HFCG) of 50 mm form factor have been shown to produce a maximum energy deposit of 3 kJ into a 3 muH inductor from a seed current. A large dl/dt into a coupled load is possible when an electro-explosive fuse is used. Previous work with a non-optimized fuse has produced ~100 kV into a 15Omega load which leads into a regime relevant for High Power Microwave (HPM) systems. It is expected that ~3()0kV can be achieved with the present 2 stage HFCG driving an inductive storage system with an electro-exploding fuse. In order to optimize the electro-explosive fuse design, a non-explosive test bed, which closely simulates the 45 kA HFCG output, is used. To optimize the tiise, effects of fuse material, fuse length, and fuse shape will be examined as well as the effects of various quenching materials. Our previous work has characterized fuse material but we are also looking into the effects of the processes used to create the fuse wire, such as tempered wire versus fully annealed wire. Additionally, to maximize the output voltage and minimize the fuse recovery time, we are optimizing the length of the fuse wire. For shorter fuse lengths, we are optimizing fuse shape as well as fuse length to find the best fuse recovery time. By optimizing the individual parameters of an electro-explosive fuse, the fuse as a whole will be optimized to produce maximum output voltage when used with an HFCG.