Impact of surface conditioning of large area electrodes on the dielectric strength of water

Experimental results are presented on the impact electrode material and surface treatment has on the dielectric strength of water. A 4 mm water gap was tested under pulsed conditions with pulse widths greater than 1 /spl mu/s, peak electric fields over 2 MV/cm and peak currents over 15 kA. 304 stainless steel electrodes machined with a Bruce profile and an effective area of 5 cm/sup 2/ were tested with surface roughnesses ranging from .34 /spl mu/m to 1.41 /spl mu/m. Results comparing electrodes that have additionally been electropolished are compared to those without an additional treatment. These various surface treatments remove microprotrusions from the electrode's surface which reduce field enhancements across the electrode surface. It is believed that this technique will minimize the number of breakdown initiation points thereby increasing the dielectric strength. Results are given on the degree to which each finish improves the dielectric strength of water.