Spread-Spectrum Modulated Multi-Channel Biosignal Acquisition Using a Shared Analog CMOS Front-End

The key challenges in designing a multi-channel biosignal acquisition system for an ambulatory or invasive medical application with a high channel count are reducing the power consumption, area consumption and the outgoing wire count. This article proposes a spread-spectrum modulated biosignal acquisition system using a shared amplifier and an analog-to-digital converter (ADC). We propose a design method to optimize a recording system for a given application based on the required SNR performance, number of inputs, and area. The proposed method is tested and validated on real pre-recorded atrial electrograms and achieves an average percentage root-mean-square difference (PRD) performance of 2.65% and 3.02% for sinus rhythm (SR) and atrial fibrillation (AF), respectively by using pseudo-random binary-sequence (PRBS) codes with a code-length of 511, for 16 inputs. We implement a 4-input spread-spectrum analog front-end in a
$0.18 \;\mu \mathrm{m}$
CMOS process to demonstrate the proposed approach. The analog front-end consists of a shared amplifier, a 2nd order
$\Sigma \Delta$
ADC sampled at
$7.8 \;\mathrm{MHz}$
, used for digitization, and an on-chip 7-bit PRBS generator. It achieves a number-of-inputs to outgoing-wire ratio of 4:1 while consuming
$23 \;\mu \mathrm{A}$
/input including biasing from a
$1.8 \;\mathrm{V}$
power supply and
$0.067 \;\mathrm{mm}^{2}$
in area.