C57.12.00-2010 - IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers | IEEE Standard | IEEE Xplore

C57.12.00-2010 - IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers


Abstract:

Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single and polyphase, wi...Show More
Scope:This standard describes electrical and mechanical requirements of liquid-immersed distribution and power transformers, and autotransformers and regulating transformers, s...Show More
Purpose:This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of the equipment are described. It is...Show More

Abstract:

Electrical and mechanical requirements for liquid-immersed distribution and power transformers, and autotransformers and regulating transformers; single and polyphase, with voltages of 601 V or higher in the highest voltage winding, are set forth. This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of equipment are described; it is also a basis for assistance in the proper selection of such equipment. The requirements in this standard apply to all liquid-immersed distribution, power, and regulating transformers except the following: instrument transformers, step voltage and induction voltage regulators, arc furnace transformers, rectifier transformers, specialty transformers, grounding transformers, mobile transformers, and mine transformers.
Scope:
This standard describes electrical and mechanical requirements of liquid-immersed distribution and power transformers, and autotransformers and regulating transformers, single-phase and polyphase, with voltages of 601 V or higher in the highest voltage winding. This standard applies to all liquid-immersed distribution, power, and regulating transformers that do not belong to the following types of apparatus: a) Instrument transformers b) Step voltage and induction voltage regulators c) Arc furnace transformers d) Rectifier transformers e) Specialty transformers f) Grounding transformers g) Mobile transformers h) Mine transformers
Purpose:
This standard is a basis for the establishment of performance, and limited electrical and mechanical interchangeability requirements of the equipment are described. It is also a basis for assistance in the proper selection of such equipment.
Date of Publication: 10 September 2010
Electronic ISBN:978-0-7381-6314-7
Persistent Link: https://ieeexplore.ieee.org/servlet/opac?punumber=5575266
Revision of

Revision of

Subscription Options - Standards

References

References is not available for this document.