Usage of Cold Spraying of High-Heat-Capacity Coatings for the Increase of Low- $T_{c}$ Superconductors Stability

The thermal stability of NbTi Rutherford-type cables was improved with cold spray technology, namely, by depositing high-heat-capacity coatings onto the surface of the superconductors. Two short samples of identical NbTi Rutherford-type cables with different metallic/ceramic coatings were prepared and tested. The spray particles were deposited onto the cables made of eight monofilamentary NbTi/Cu wires via supersonic velocity impact. The temperature of the process is much lower than the melting point of the sprayed material. The doped sample contained 1 vol.% of large-heat-capacity substance (LHCS) Gd
₂
O
₃
, whereas the comparison sample did not contain any LHCS. The average heat capacity of the doped sample at 4.2 K was increased more than two times. During the tests, both samples at LHe temperature were subjected to short (~1 ms) electromagnetic disturbances in the transverse constant magnetic field. It was found that the minimum quench energies for the sample with Gd
₂
O
₃
were 1.4-1.5 times higher than that for the comparison cable without LHCS. The described method is very promising for the stabilization of dense massive windings where the direct heat transfer to the LHe is hampered and the superconductor operates in almost adiabatic conditions.