Adaptive Radon–Fourier Transform for Weak Radar Target Detection

The Radon-Fourier transform (RFT) with a long coherent integration time has recently been proposed for detecting a moving target with an across range cell (ARC) effect. However, without effective clutter suppression, clutter will also be integrated via the RFT, which may affect weak target detection. Based on the maximal signal-to-clutter-plus-noise ratio (SCNR) criteria, a novel adaptive RFT (ARFT) is proposed in this paper to effectively detect a “low-observable” target in a clutter background. The proposed ARFT can combine RFT and adaptive clutter suppression by introducing an optimal filter weight, which is determined from the clutter's covariance matrix as well as a steering vector for a moving target with the ARC effect. In the transformed range-velocity space, the proposed ARFT can suppress background clutter and optimally integrate the target's energy. Nevertheless, with the increase in the integration time, the ARFT needs to address two difficulties in its real implementation. One is the lack of independently and identically distributed (i.i.d.) training samples in a heterogeneous clutter background, and the other is that the computational complexity is too high due to the large number of pulse samples. Therefore, a subaperture ARFT (SA-ARFT) is further proposed in this paper. It divides all coherent pulse samples into several subapertures and accomplishes adaptive clutter suppression in each subaperture. Subsequently, SA-ARFT implements coherent integration among the outputs of different subapertures. The proposed SA-ARFT method can obtain a similar SCNR improvement factor (SCNR IF) with a large number of i.i.d. training samples, while it can obtain a much higher SCNR IF than the ARFT with limited i.i.d. training samples and much lower computational complexity in a heterogeneous clutter background. Finally, some numerical results are provided to demonstrate the effectiveness of the two proposed methods.