Nanosecond Pulsed Array Wire-to-Wire Surface Dielectric Barrier Discharge in Atmospheric Air: Electrical and Optical Emission Spectra Characters Influenced by Quantity of Electrodes

In this paper, an array wire-to-wire surface dielectric barrier discharge (DBD) structure is used to generate large-scale plasma by bipolar nanosecond pulse power in atmospheric air. The quantity of electrodes can be adjusted from 1 to 10 for varying discharge area. The applied voltage and discharge current are measured, the discharge images are captured, and optical emission spectra (OES) are collected. The discharge power, discharge area, and OES intensity for a single group of/and whole structure are calculated. The vibrational and rotational temperatures are simulated by the OES of N2 (C-B, $\Delta \nu =-2$ ), and the effects of the quantity of electrodes on discharge current, discharge power, discharge area, OES intensity, and vibrational and rotational temperatures are investigated. The results show that the discharge current has two main peaks during single applied pulse voltage, and decays in a fluctuant type. As the quantity of electrodes increases, the peak value of discharge current increases and the decaying time from peak value to zero around becomes longer. The discharge power, discharge area, and OES intensity have increasing tendencies, and those of the single group of wires decrease. In addition, when the quantity of electrodes increases, the vibrational temperature increases first and then decreases, and the rotational temperature varies in a fluctuant type.