The Capacitive Sensing of the Pulsatile Liquid Flow—Investigation on a Physical Vascular Model

This article investigates a prospective capacitive sensing method for the measurement of physical characteristics of a pulsatile liquid flow. It was tested on a physical vascular model. The volume pulse wave sensor holds a high sensitivity and thus great potential in the field of industrial applications and also in biomedical applications where we also encounter a pulsating flow of blood. Two types of capacity sensors were developed and tested on our blood vessel model, currently used for the simulation of pulse wave propagation with the possibility of changes in vessel properties and many setups are reached for testing different pulse wave propagations. The newly developed capacitive sensor detects the capacity change of pulsating liquid flow in the vascular model. Data from the capacitive sensor are compared with two reference sensors, one for direct pressure sensing and the second for noncontact optical sensing of changes in diameter. The signal processing is used for all three types of sensors and analysis in the time and frequency domain to determine the accuracy. The use of capacitive sensors is promising since it can measure a negligible change in the diameter of the vessel in the range of tens of femtofarads (fF). We can confirm that the high precision measurement is dependent on the environment, which can cause the capacity change, but with proper shielding it can be eliminated.