An Arduino Uno Controlled Fire Fighting Robot for Fires in Enclosed Spaces

A basic design of robot that can fight fires at an affordable cost could prove to be boon in fighting domestic fires, till help arrives. The robot developed consists of three elements which is the hardware, electronic interfacing circuits, and software program. The robot has four battery operated motor (BO motor). This firefighting robotic system is capable of detecting and extinguishing fire. These robots can be made to roll into places where it is not safe for humans to enter. Time is of essence when it comes to fighting fires as even a few minutes’ delay can turn small fires into raging inferno. This robot is designed as a first response unit so it can suppress the fire keeps it under control till help arrives. This firefighting robotic system is controlled by an Arduino Uno development board. It is also equipped with the fire flame sensor for detecting fires. It is equipped with a water tank and a pump. So, on detecting fires it sprays water extinguishing the fire. Water spraying nozzle is mounted on servo motor to cover maximum area. Although there is a lot of scope for improvement, this could be a first step in developing a complete fire-fighting robot that could also rescue victims. The main function of this robot is to become an unmanned support vehicle, developed to search and extinguish fire. By using such robots, fire identification and rescue activities can be done with greater accuracy and securely without exposing the fire fighters to dangerous conditions. In other words, robots can reduce the need to expose fire fighters to danger.