Program for Simulation and Testing of Application GUI Configuration Terminal of Device Switch

Nowadays on network management, it is important for the process of managing and operating an information network. In this paper, we simulate and test a Switch Device’s Graphic User Interface (GUI) configuration terminal application in preparation for resolving the user time-consuming setup problems for a long time. The Graphic User Interface (GUI) for configuration device Switch can help reduce time and workflow by using the keypad to use various configuring commands without having to type the command itself to reduce the problem of using too long time. The program will send commands to the device switch. If the user wants to use additional commands can add the more command in this program. The program can be divided into 3 parts as follows: 1) working on the main page 2) working on the Tool page 3) working on the Show page. The result of this program can be used to configuration terminal of the device switch in real use and reduces the hassle for configuring terminal of the device switch. Someone who would like to use this simulation program, they must have the knowledge about computer network such as set IP address, configuration terminal of the equipment in the network and etc., In the instruction set of configuration terminal in this program only depended on Cisco Certified Network Associate (CCNA) by Cisco Switch.