Wideband Power-Dependent Power Limiter Based on Distributed Low-Temperature Superconductor rf-SQUIDs for Cryogenic RF Receivers

A novel design of a radio-frequency (RF) power limiter for protecting sensitive superconductor receiver components from high-power microwave signals is presented. In this approach, two low-
${T} _{c}$
superconductor microstrip lines, one of which is coupled with an array of RF superconducting quantum interference devices (rf-SQUIDs), are combined with a pair of hybrid couplers to provide the power limiting operation at very low RF power levels. The key concept is built on the fact that a microstrip line coupled to an array of rf-SQUIDs behaves as a power-dependent phase shifter and its phase can be controlled by the input RF power. This phenomenon is exploited to achieve the desired RF power-limiting operation. The device is fabricated using an eight-layer niobium-based superconducting process node SFQ5ee by MIT Lincoln Laboratory (MIT-LL). A monolithically integrated wideband hybrid coupler is used in this design as it dictates the bandwidth of the overall device. The operating frequency of the power limiter is 10 GHz with a 2-GHz bandwidth. The performance of the device is measured for input RF power levels ranging from −30 to +10 dBm, as well as arising intermodulation products are experimentally investigated. The output power increases linearly with the input power up to −15 dBm, and for higher power levels, the device offers an increasing attenuation to limit the output RF power starting above −15 dBm.