RF-Self-Powered Sensor for Fully Autonomous Soil Moisture Sensing

Soil moisture monitoring and irrigation scheduling are essential parameters in farming efficiency. Internet-of-Things (IoT) technology is a promising solution for automating irrigation procedures and improving farming efficiency by removing human faults. In this article, a new method is introduced to measure soil moisture level along with providing energy to run a low-power transmitter as an alarm signal. A combination of a metamaterial perfect absorber (MPA) and two rectifiers that are designed at different frequencies specifies 5% and 25% soil moisture levels. The sensor monitors the soil moisture continuously without consuming energy. Once the soil moisture becomes 5% of the first rectifier starts working and provides 65 uW dc output, while the second rectifier is off. Increasing the soil moisture to 25%, the second rectifier creates 100 uW dc output when the first rectifier is off. The designed structure is fabricated on RO4003 in a
$4 \times 4$
array. The measurement results are provided by performing a set of different experiments. Initially, the MPA’s absorption characteristics are validated facing different polarization and incident angles. Then, the sensing capability is proven by burying the proposed sensor under sand and measuring the dc outputs of rectifiers. A strong correlation between simulation and measurement results validates the design procedure.