A low-cost neurostimulator with accurate pulsed-current control

A constant-current stimulator for high-impedance loads using only low-cost standard high-voltage components is presented. A voltage-regulator powers an oscillator built across the primary of a step-up transformer whose secondary supplies, after rectification, the high voltage to a switched current-mirror in the driving stage. Adjusting the regulated voltage controls the pulsed-current intensity. A prototype produces stimulus of amplitude and pulsewidth within 0 /spl les/ I/sub skin/ /spl les/ 20 mA and 50 /spl mu/s /spl les/ T/sub pulse/ /spl les/ 1 ms, respectively. Pulse-repetition spans from 1 Hz to 10 Hz. Worst case ripple is 3.7% at I/sub skin/ = 1 mA. Overall consumption is 5.6 W at I/sub skin/ = 20 mA.