Internet of Things (IoT) System with Matlab interface for Multi Patient ECG's Monitoring

The wireless sensor network (WSN) is used to monitor environmental or phenomena physical, such as noise, pressure, motion or temperature, and to transmit data to the capital. Nowadays, with the explosive growth of IoT technology, more and more practical applications can be found in many fields, including security, smart metering, agriculture, smart cities and more domestic intelligence. There are other applications, especially military, home automation, industrial, sanitary, and especially medical applications and sanitary. This article suggests and explores home health care. The Arduino can be used to perform a portable ECG with the heart condition reading function. The main component of this system is the AD8232 sensor which can read the heart rate and process the voltage of the electrodes connected to the body. By combining the Arduino UNO microprocessor and HC 05 FC-114 as Bluetooth or Wifi, ZigBee antenna, GSM/GPRS and even XBee, the ECG screen is displayed in real time on a smartphone. We used an ECG simulator as an artificial corrective agent which is used as a tool to justify the performance of a portable ECG supported on the results obtained from the test. The EGC can be sent via the simulator to the smartphone or to the Matlab interface through a wireless communication module (ZigBee, Bluetooth, Wifi, GSM / GPRS or XBee). The exact result shows the patient's condition in real time. In this article, ECG results are published through the Matlab interface.