A Load Adaptive Hybrid DPS Control for DAB to Secure Minimum Current Stress and Full ZVS Operation Over Wide Load and Voltage Conversion Ratio

Wide variations in voltage conversion ratio and loading are the most important parameters to consider when designing off-board EV chargers to achieve high power density and efficiency. Dual phase shift (DPS) modulation provides a better way for dual active bridge (DAB) DC-DC converter operation when load side parameter variation is utmost important. To accomplish this, conventional DPS control is modified to ensure zero voltage switching (ZVS) across the entire load range despite wide variations in voltage conversion ratio. The designed control provides ZVS of all FETs as compared to the conventional DPS control over full loading range. For this, magnetizing inductance of HF isolation transformer is utilized and designed to shape the secondary side current for getting ZVS for both active legs. The light loading performance of the converter is improved with the bidirectional conduction angle control. The hybrid utilization of DPS control is incorporated with minimum peak current stress considerations. A Karush-Kuhn-Tucker (KKT) method based on Lagrange's multipliers is used for mathematical derivation of optimized solution of both control parameters. Performance of designed control is verified using experimental results for wide variation in battery terminal voltage. For validation, a 1250 W laboratory prototype is developed. A comparison of ZVS regions among the conventional and designed modulation technique, shows the effectiveness under wide voltage and loading scenarios.