Research on the Transient Interrupting Voltage of Mechanical HVDC Circuit Breaker and Its Influences on the Postarc Dielectric Recovery Process

The flexible high-voltage direct current (HVDC) power system develops quickly with the large-scale utilization of new energy and the increase of direct current (dc) loads in recent years. HVDC circuit breakers are very important components in the flexible HVDC power system. The mechanical HVDC circuit breaker including vacuum interrupters is a potential solution for HVDC interruption. After the current interruption, a transient interrupting voltage (TIV) generated from the interaction with the external circuit will be applied to the mechanical HVDC circuit breakers and might cause a failure interruption. However, there are still few studies about the influences of TIV on the postarc dielectric recovery process of mechanical HVDC circuit breakers. In this article, a circuit model based on the simplification of a 10-kV mechanical HVDC circuit breaker is developed for the purpose of studying the characteristics of TIV. Then the effects of the parallel snubber circuit on the TIV are discussed. Moreover, the influence of TIV on the postarc residual plasma dissipation process is simulated by a particle-in-cell (PIC) model. The results show that the TIV with a parallel snubber circuit has little effect on the whole dissipation time compared with that without a parallel snubber circuit. It should be noted that the microdissipation processes of the above two situations are different.