The Focus of Dual-Frequency Induced Polarization Electric Field Based on Intelligent Algorithm in Coal Mine Electrical Exploration

As the most important and dangerous front-end production link, coal mining operations will inevitably face geological disasters such as water inrush, rock burst, collapse, and fire, posing a great threat to the life and safety of miners. Among the five major geological disasters (gas, dust, water, fire, roof) in coal mines, the threat of flooding is very serious and it is one of the main disasters in coal mines. The research and development of dual-frequency excitation technology and its application in coal mine exploration have realized the elimination of potential safety hazards, improved the work efficiency and safety factor of prospectors, and realized the automated operation of the exploration process. This article explores the electric field of the intelligent algorithm's focused dual-frequency induced polarization method in coal mine electrical exploration, and summarizes some of the advantages of the intelligent algorithm's focused dual-frequency induced polarization method in coal mine surveying on related materials, and then conducts related experiment, through the experiment of focusing on the dual-frequency IP method in the coal mine survey, obtained the result, in the abnormal point detection experiment, the change trend of the two curves is the same, the increase is more obvious at 1.3-1.5m, and at 1.5m When reaching the limit value, when it exceeds 1.5m, it starts to fall. It shows that when there is a water-bearing anomalous body directly in front of the tunneling section, the measurement results of the two survey lines are roughly the same. Compared with the no anomaly body, the apparent resistivity and the apparent amplitude frequency both change significantly, and reach the extreme in a certain direction. However, the actual anomalous body is located 1.0m directly in front of the tunneling section, which means that the actual position of the anomaly cannot be determined based on the apparent resistivity and the extreme point position of the apparent amplitude frequency.