Single Switch Module Type DC-DC Converter With Reduction in Voltage Stress

This paper proposes a new generalized switched-inductor-capacitor module for a non-isolated dc-dc converter with low voltage dc source applications. Further, the proposed module can be extended to an
$n$
number of modules to achieve high voltage gain. The derived structure has low voltage stress on power components. This structure benefits the designer by allowing him/her to choose a low
$r_{DS}$
(ON) switch due to the low voltage stress across the semiconductor devices, resulting in high efficiency and low cost. In most dc/dc converters, the voltage stress on the output diode will equal the output (high) voltage (
$V_{o}$
). But in the case of the proposed topology, the diode voltage will be the difference between
$V_{o}$
and the input voltage (
$V_{g}$
), which eases the reverse recovery problem. The key metrics of the derived topology, such as component count, voltage stresses, and gain factor, are analyzed to compare with similar existing topologies. The scaled down prototype setup is developed for 200 W with an efficiency of 93%. Finally, various experimental results are discussed for the different duty cycles.