SPAD-Based LiDAR With Real-Time Accuracy Calibration and Laser Power Regulation

This brief reports a light detection and range (LiDAR) imager which incorporates an image sensor based on a single-photon avalanche diode (SPAD) with the resolution of 32
$\mathbf {\times }$
32, a VCSEL-based laser emission system with the same resolution as image sensor as well as the pixel spacing, and a field programmable logic gate array (FPGA) used to realize the calibration algorithm and control the working time of the LiDAR imager. A gating high-voltage driver circuit drives the image sensor to reduce background noise interference and realize real-time accuracy calibration for the time-to-digital converter (TDC) with the resolution of 200 ps. The common-cathode driver circuit with the narrow pulse, adaptive frequency and power regulation drives different channels of VCSEL based on the time-division multiplexing method to improve the signal-to-noise ratio and reduce power consumption of the LiDAR imager. The LiDAR imager based on the proposed circuit architecture and calibration algorithm can achieve depth imaging up to 10 m revealing a repeatability error of 10 cm at 10 frames/s.