Radar Cross Section Analysis of a Finite Parallel-Plate Waveguide with Four-Layer Material Loading: A Rigorous Wiener-Hopf Approach

The analysis of electromagnetic scattering by open-ended metallic waveguide cavities is an important subject in the prediction and reduction of the radar cross section (RCS) of a target. This problem serves as a simple model of duct structures such as jet engine intakes of aircrafts and cracks occurring on surfaces of general complicated bodies. Some of the diffraction problems involving two-and three-dimensional cavities have been analyzed thus far based on high-frequency techniques and numerical methods. It appears, however, that the solutions due to these approaches are not uniformly valid for arbitrary dimensions of the cavity. Therefore it is desirable to overcome drawbacks of the previous works to obtain solutions which are uniformly valid in arbitrary cavity dimensions. The Wiener-Hopf technique is known as a powerful, rigorous approach for analyzing scattering and diffraction problems involving canonical geometries. In this paper, we shall consider a finite parallel-plate waveguide with four-layer material loading as a geometry that can form cavities, and analyze the plane wave diffraction rigorously using the Wiener-Hopf technique. Both E and H polarizations are considered.