A 10 kW IRFEL design for Jefferson Lab

Recent work at Jefferson Lab has demonstrated the viability of same-cell energy recovery as a basis for a high average power free-electron laser (FEL). We are now extending this technique to lase at average powers in excess of 10 kW in the infrared. This upgrade will also produce over 1 kW in the UV and generate high brightness Thomson back-scattered X-rays. The power increase will be achieved by increasing the electron beam energy by a factor of four, and the beam current and the FEL design efficiency by a factor of two. Utilization of a near-concentric optical cavity is enabled by the use of very low loss state-of-the-art coatings. The FEL will be placed in the return leg of the electron beam transport, giving a machine footprint quite similar to that of the existing 1 kW IR device. Some features of the upgrade are straightforward extensions of those in the present 1 kW design; others break new ground and present new challenges. These will be described. The required electron beam parameters and the laser performance estimates will be summarized. Changes required in the electron beam transport will be outlined and the optical cavity design briefly reviewed.