Comparison of Shielding Effectiveness of Different Shielding Methods for Multi-Core Cable on Lightning Surge Current

Appropriate shielding methods can reduce the lightning induced voltage and current of cables. In this article, different lightning surge currents (8/20 and 5/320
μ
s) are coupled to the tested multi-core cable with single shielding layer and double shielding layers. The shielding effectiveness (SE) on the lightning surge current is compared for different cable shielding methods. The experimental results show that the cable induced current is effectively reduced when the shielding layer, the shielding spare core wire or the metal tube are grounded at two ends. A better shielding effect for the cable with double shielding layers is achieved by grounding both ends of the outer shielding layer and one end of the inner shielding layer, reducing the induced current to about 5% when the shielding layer is not grounded. Moreover, the SE of the spare core wire, used as the shielding wire in the multi-core cable, is better than that of the external shielding wire of the cable. The SE of the metal tube increases more and more slowly with the increase of the tube coverage percentage. Furthermore, the descending order of the SE of shielding methods involved here are grounding both ends of double shielding layers, grounding both ends of single shielding layer, spare core wire shielding and metal tube shielding. Finally, some engineering recommendations are proposed through the comparison between the shielding methods in this article and relevant works.