Experimental and Numerical Analysis of Transient Overvoltages of PV Systems When Struck by Lightning

Photovoltaic (PV) systems are considered as one of the most important and popular forms of renewable energy sources worldwide. Due to the installation of PV modules on rooftops and outdoor areas, they are frequently subjected to lightning strikes, leading to a deterioration in PV systems. To provide an efficient lightning protection system, the accurate modeling of PV systems during lightning strikes is required. The main objective of this article is to assess the transient behavior of PV systems when struck by lightning, where the PV system is modeled using the partial element equivalent circuit (PEEC) and finite difference time-domain (FDTD) methods. The PEEC method is one of the accurate methods used to represent the PV system by its equivalent
RLC
circuit to study lightning transients. Moreover, the FDTD method provides high accuracy when studying lightning transients by analyzing the electric and magnetic fields inside the PV system. The PEEC and FDTD methods are used to calculate the transient overvoltages at different points of the PV system. Then, a small-scale PV system is tested in the laboratory using an impulse generator representing the lightning strike to verify the correctness of the results obtained by simulation. Most of the existing research works introduce low accuracy in PV system modeling during lightning transients by neglecting the effect of the mounting system, metal frame, and mutual coupling, which are considered in this work. Moreover, the high-frequency nature of lightning current is considered when modeling the elements of the grounding system. Verifying the results by laboratory experiments can guarantee the application of the simulation model on large-scale PV systems.