Reduction of Deep Dielectric Charging of Polyimide by Incorporation of Glass Microsphere or Glass Fiber Reinforcement

In outer space’s extreme electron radiation environment, the insulating medium will experience a deep dielectric charging effect. As an excellent insulating medium, polyimide is widely used in spacecraft. In practical use, glass microspheres and glass fibers are often added to increase its mechanical strength. However, the influence of glass microspheres and glass fibers on deep dielectric charging effects has often been ignored in previous studies. Therefore, the work in this article established a 3-D deep dielectric charging model of glass microsphere and glass fiber reinforced polyimide. Using the model, the effects of glass microsphere and glass fiber volume fraction, glass microsphere spacing, glass fiber orientation, and 3-D glass fiber structure were investigated. The results show that the larger the volume fraction of glass fiber or glass microsphere, the more obvious the decrease of polyimide composite media’s average electric field strength. Under the same volume fraction, glass fibers are more favorable to reduce the average electric field strength than glass microspheres. The surface of glass microspheres will form charge accumulation, increasing local maximum electric field intensity, which is greater than the maximum electric field value of pure polyimide under electron radiation. When the spacing of glass microspheres decreases, the degree of electric field distortion increases, but the electric field value decreases when the microspheres contact each other. When the glass fiber orientation is perpendicular to the ground plane, it can better provide the electronic release channel, thereby reducing the deep dielectric charging effect. Using 3-D glass fiber structures can reduce the polyimide’s average electric field value and reduce the maximum local electric field distortion.