Smart Health Monitoring System With Iot

During a pandemic, healthcare automation ensures patient assistance and eliminates the need for a caretaker near the patient. As a result, a Raspberry Pi-based IoT smart system was built to meet the needs of the circumstance. This paper presents automation strategies for measuring data such as temperature, ECG, heartbeat, saline bottle level, and body fall in the healthcare setting. Instead of using an Ag/AgCl electrode, the ECG signal is acquired using a Graphene NanoRibbon (GNR) electrode. These automation gadgets use sensors and mobile communication devices to monitor patient health remotely. The suggested system employs a heart rate sensor that detects a person’s heart rate and sends the heart rate and R-R interval measurements via the Internet. The results can be recorded and shown on an LCD screen using a Raspberry Pi. The main aim of work is to provide an extensive research in capturing the sensor data, analyzing the data and providing a feedback to patients based on different health parameters. During an emergency, an alert message is delivered to the concerned person’s mobile phone and email address after collecting data from webpage. Data was sent via GSM module for visualization. Doctors can access patient records through a website.