Multi-COBS: A Novel Algorithm for Byte Stuffing at High Throughput

Framing methods are used to break a data stream into packets in most digital communications. The use of a reserved symbol to denote the frame boundaries is a popular practice. This end-of-frame (EOF) marker should be removed from the packet content in a reversible manner. Many strategies, such as the bit and byte stuffing processes employed by high-level data link control (HDLC) and Point-to-Point Protocol (PPP), or the Consistent Overhead Byte Stuffing (COBS), have been devised to perform this goal. These bit and byte stuffing algorithms remove the reserved EOF marker from the packet payload and replace it with some extra information that can be used to undo the action later. The amount of data added is called
overhead
and is a figure-of-merit of such algorithms, together with the encoding and decoding speed. Multi-COBS, a new byte stuffing algorithm, is presented in this paper. Multi-COBS provides concurrent encoding and decoding, resulting in a performance improvement of factor four or eight in common word-based digital architectures while delivering an average and worst-case overhead equivalent to the state-of-the-art. On the reference 28-nanometer field programmable gate array (FPGA) (Artix-7), Multi-COBS achieves a throughput of 6.6 Gbps, instead of 1.7 Gbps of COBS. Thanks to its parallel elaboration capability, Multi-COBS is ideal for digital systems built in programmable logic as well as modern computers.