Design and Implementation of Smart ATM under IDLE Application

Now a day’s use of ATMs to withdraw funds has grown over time. At the same moment, number of theft and robbery events has grown, requiring the need for a safer ATM with extra security features. For the successful working we are using the raspberry pi 3b+, RFID, Web cam and GSM module. Raspberry pi varies from different aspects of 8051 Micro Controller. This agency’s purpose is to create a safety smart ATM that employs RFID and fingerprint authentication to get access. The user’s RFID identification and fingerprint data are obtained, followed by the recognized card details, approval status, and access location being sent on for validation against database information. The connected creditor receives a message if the information is validated against the record details obtained. The registered owner is also notified about the circumstance, date, and time of the access. It is also advised to install a web camera and use OTP authentication for enhanced security. To guarantee absolute safety, the profile of the customer that use the ATM card is documented in the unit using a camera, as well as the timeline of access, which may be used in the instance of suspicion and any suspicious authentication is performed a buzzer ring automatically. The whole working is done under the IDLE Software.