Torque Ripple Minimization Control Strategy in Synchronous Reluctance Machines

Torque smoothness is an essential requirement for high-performance motor drive applications. Synchronous reluctance machines (SyRM) have high torque ripple due to non-linear magnetic circuit and saturation. Typically, in Permanent magnet machines the active torque ripple compensation is achieved by injecting a compensating ripple current in the
q-axis
. For SyRM, the current injection method for active torque ripple cancellation can be used in both the
d-axis
and
q-axis
. However, the saturation of the motor parameters with the changing current can result in varied performance between the two methods. This paper evaluates the effectiveness of both of these methods for torque ripple cancellation. For evaluation, the impact of parameter saturation with ripple current injection on the
d-axis
and the
q-axis
is studied. The mathematical conclusions obtained are evaluated by both the simulation and the experimental results performed on a 4 pole 1200W Synchronous reluctance machine.