Three-Phase Current Reconstruction for PMSM Drive With Modified Twelve Sector Space Vector Pulse Width Modulation

To reduce the cost and size of the power converters, techniques of reconstructing three-phase current through a single current sensor have been employed in permanent-magnet synchronous motors. In existing studies, the reconstruction precision is largely affected by current reconstruction dead zones in the space vector pulsewidth modulation (PWM) plane, which requires additional algorithms to compensateeither by modifying PWM modulation strategy or by phase-shifting of PWM signal. In this article, a phase current reconstruction method for three-phase inverter with the modification of a twelve sector space vector pulsewidth modulation (TS-SVPWM) is proposed. By arranging a single current sensor on a circuit branch between two power switches, the proposed method can reconstruct the three-phase current of the voltage source inverter and avoid the dead zones located at the sector boundary region. This method can be realized not only with a single Hall-effect current sensor but also with a single shunt resistor, which can expand its application. The proposed method can be a fault-tolerance solution when there are phase current sensor faults. Beside, the three-phase current can be reconstructed when there are open-circuit faults in the power switches. Compared with previous methods, the proposed TS-SVPWM can reduce the phase current harmonics. The effectiveness of the proposed method is validated by experiments.