A Diesel Engine Assembly Quality Detection Method Based on Cross-point Frequency Response and Static and Dynamic Information Fusion

For the problem that the early fault information of diesel engine system is weak and difficult to identify and diagnose, an early fault diagnosis method based on cross-point frequency response and static and dynamic information fusion was proposed for the assembly quality of diesel engine system. The dynamic vibration response signal and static cross-point frequency response signal of the diesel engine system were collected by reasonable layout of measuring points. After CEEMD reconstruction and de-noising, the sample entropy and approximate entropy were extracted as characteristic parameters of the dynamic signal, and the frequency response features were extracted from the static signal. The static and dynamic information of the two kinds of information was integrated by PCA. The optimized support vector machine is used to identify the dynamic information and the static and dynamic fusion information respectively. The results show that this method can effectively detect the assembly quality of key components of diesel engine system, and the accuracy of diagnosis is up to 95%, and the recognition rate after static and dynamic information fusion is better than that of dynamic information. The method presented in this paper has a good application prospect in the assembly quality inspection and early fault diagnosis of diesel engine system.