D-Statcom Based Voltage Sag And Swell Improvement Of Distribution System

The primary voltage control can be obtained when the voltage kept varying while the measurement is to be carried out at the terminals in the case if the generators which are large capacity. The control if the voltage can be done when the current can be varied which is flowing in case of the field for the machine having synchronous nature while the voltage regular must be automatic for the generator. In the present work the distribution system is studied for the case of the D-STATCOM based voltage sag and the S-STATCOM based voltage well conditions through the MATLAB software. The simulation results shall be obtained for these cases through the software. The three phase voltage as well as the current for the case of transmission line having at the bus bar have also been obtained for the different cases. The receiving end bus bar measurement for the cases shall be obtained as the graphical format.