Microphone Array Beamforming With High Flexible Interference Attenuation and Noise Reduction

This paper studies the problem of microphone array beamforming to enhance a speech signal of interest in adverse acoustic environments, where interference and additive background noise coexist. The problem is formulated as one of convex optimization whose solution under a specified level of interference attenuation leads to an interference controlled maximum noise reduction (ICMR) beamformer, which can be expressed as a linear combination of two MVDR beamformers: one attempts to extract the desired source signal while the other attempts to extract the interference. The combination coefficients are functions of the array manifold vectors, noise coherence matrix, and the specified interference attenuation factor. By tuning the interference attenuation factor, the ICMR beamformer can be implemented to achieve aggressive interference attenuation or even eliminate interference completely; but this may lead to less additive noise suppression or even noise amplification. To control the maximum sacrifice in gain (SG) of the signal-to-noise ratio (SNR) that is acceptable for additive reduction, a variant of ICMR is derived, which is named as the ICMR-SG beamformer. Simulations are performed and the results show that the ICMR beamformer is able to control the amount of interference attenuation. In comparison, ICMR-SG controls the maximum SG of SNR while achieving the optimal possible level of interference attenuation.