The Development of Piezoelectric Inchworm Actuator Clamped With Magnetorheological Elastomer and Its Potential Application in Brain–Computer Interface Implantation

The piezoelectric inchworm actuator with high-positioning accuracy and large output force is a potential device to implant microelectrode in the invasive brain–computer interface (BCI). However, the traditional piezoelectric inchworm actuator adopts multichannel electrical control signals from external equipment and rigid-to-rigid friction contact to drive, resulting in complex control and uneven friction. To solve the above problems, in this article, magnetorheological elastomer (MRE) is first proposed as the clamping material of the piezoelectric inchworm actuator. An MRE–capillary–cover sandwich structure is adopted to achieve rigid-to-elastomeric clamping. The driving and clamping actions of the actuator are controlled by two cam mechanisms mounted on the same shaft, and a battery can feed the actuator. A kinetic model is established to analyze and predict the actuator motion. Several crucial clamping parameters are explored, and the performance experiments are conducted to evaluate actuator characteristics. A verification experiment is carried out to prove the feasibility of the microelectrode implantation in the pig brain (0.6% agarose gel). The actuator can reach the maximum velocity of 1250.4
μ
m/s and the maximum output force of 420 mN; in the forward/backward motion, the minimum step is 0.5837/0.5912
μ
m, and the repeatability is 0.0465/0.0469
μ
m; thus, the actuator has great application potential in BCI.