Programmable Acoustic Delay-Line Enabled Low-Cost Photoacoustic Tomography System

Photoacoustic tomography (PAT) is an emerging technology for biomedical imaging that combines the superiorities of high optical contrast and acoustic penetration. In the PAT system, more PA signals are preferred to be detected from full field of view to reconstruct the PA images with higher fidelity. However, the requirement for more PA signals’ detection leads to more time consumption for single-channel scanning-based PAT system or higher cost of data acquisition (DAQ) module for an array-based PAT system. To address this issue, we proposed a programmable acoustic delay-line (PADL) module to reduce DAQ cost and accelerate imaging speed for PAT system. The module is based on bidirectional conversion between acoustic signals and electrical signals, including ultrasound transmission in between to provide sufficient time delay. The acoustic delay-line module achieves tens or hundreds of microseconds’ delay for each channel and is controlled by a programmable control unit. In this work, it achieves to merge four inputs of PA signals into one output signal, which can be recovered into original four PA signals in the digital domain after DAQ. The imaging experiments of pencil leads embedded in agar phantom are conducted by the PAT system equipped with the proposed PADL module, which demonstrated its feasibility to reduce the cost of the PAT system. An
in vivo
study of human finger PAT imaging with delay-line module verified its feasibility for biomedical imaging applications.