Evaluation of Mass Production Results of Cryogenic Structural Stainless Steels for ITER Toroidal Field Coils

The National Institutes for Quantum Science and Technology (QST) has been developing new cryogenic structural materials, such as JJ1 stainless, and nitrogen-enhanced 316L stainless, known as 316LN, since the 1980s for increased tensile strength to comply with the ITER requirements. QST has also developed prediction curves for yield stress and tensile strength at temperatures from room temperature to 4 K based on the actual properties of these materials at room temperature to reduce the number of tensile tests conducted at 4 K, which are costly. After material trials and qualifications, the manufacture of material candidates began in earnest from 2012. In total, over 2400 materials (over 5000 tonne) were manufactured by six fabricators until manufacturing was completed successfully in 2020. The material properties of each material candidate were evaluated by QST and added into a database registry. Sampling tests, e.g., tensile tests were conducted at 4 K and 77 K. The correlations between the mechanical and material properties were evaluated to optimize material specifications of future superconducting magnets. The accuracy of QST's prediction curves was also confirmed. This paper summarizes the evaluation of the material properties and the prediction accuracy of mass-produced materials for the ITER toroidal field coil cases.