Fabrication and Characterizations of PbZrxTi1-xO3 (PZT) Ultrasonic Sensing Chips

PbZr
_x
Ti
_1-x
O
₃
(PZT) ultrasonic sensing chips were fabricated by ball milling, electrical discharge and spraying on iron sheets. Various PZT growth conditions, including the thickness of the iron sheet and the coating layers, were investigated. Ultrasonic sensing measurements indicated that PZT chips of sufficient thickness and with 6 or 9 coating layers exhibited ultrasonic sensing capability. Further, multiple material and electrical characterizations revealed that while sufficient thickness and low leakage were required, uniform growth of the film and a grain size of approximately 150 nm were preferable for ultrasonic sensing. Their compact size, rapid response, and low cost make PZT-based ultrasonic sensors promising for future ultrasonic detection application.