Sea Surface States Detection in Polar Regions Using Measurements of Ground-Based GNSS Interferometric Reflectometry

This article analyzes the interferometric measurements of ground-based global navigation satellite systems (GNSSs) stations and proposes a novel method for sea surface states detection. The novel technique benefits from a cost-effective data collection from a large number of global GNSS stations. In this study, we extend a traditional GNSS interferometry reflectometry (GNSS-IR) model so that it can be applied to a multilayer surface by considering the surface roughness, total reflectivity, and penetration loss in multilayer situations. Based on this model, the wavelet analysis is used to perform parameterization on the interferometric observations represented by the signal to noise ratio (SNR). An integration factor and power curve are also proposed to characterize the surface state transition. One-year data from an Arctic geodetic GNSS station in the north of Canada are collected for analysis to validate the proposed approach in comparison with the existing methods based on the amplitude and damping factors. The results show that the new method demonstrates good usability and sensitivity to detect surface state transitions, e.g., icing, snowfall, and snow melting. However, the amplitude and damping factor-based methods derived from the single-layer model are only able to detect the pure ice surface and cannot respond to thick snow conditions. Finally, the high-resolution spaceborne images confirm the reliability of this method, exhibiting a great potential for long-term coastal sea surface detection based on the global geodetic GNSS stations and later being expected to be applied to sense cryosphere surface states.