Noise and Conversion Analyses for High-Tc Superconducting Harmonic Mixers: Theoretical Modeling and Experimental Verification

High-T_c superconducting (HTS) harmonic mixers are attractive frontends for terahertz wireless communication and sensing applications. However, the investigation of HTS harmonic mixers has long been hindered by the lack of effective theoretical method in device modeling. This article presents a modeling approach for analyzing the noise and conversion properties of HTS harmonic mixers. By quantitively analyzing the contribution of the parasitic components to frequency conversion, a parasitics-selection based equivalent circuit model is built with the architecture complexity reduced to a six-port network. Besides, a fast hybrid-solution method that combines the single-tone current excitation and perturbation-derivation processing techniques, is developed for efficiently calculating the conversion impedance matrix for harmonic mixing. Detailed derivations are then carried out to acquire the semianalytic expressions of noise temperature and conversion gain after solving the noise correlation matrix for harmonic mixing. The presented modeling method has been verified by the fourth harmonic mixing experiments for a dual-band antenna-coupled HTS Josephson-junction mixer module. The measured and simulated results are in good agreement in terms of the noise temperature and conversion gain as well as their dependance on dc biasing, local oscillator pumping, and operating temperatures. The results have validated the effectiveness of the presented modeling method for analyzing the properties of HTS Josephson junction mixers.